6
Trimline 70 SL
•
See if the fireplace switches on normally. There may be
some air in the pipeline at first; this may cause a delay to the
start-up. (Therefore, always start with no glass pane fitted.)
•
Inspect all gas-carrying parts for leaks while the unit is
burning.
•
The blocks can be put in place in accordance with the
images shown in Chapter
4 Placing the ceramic wood set
.
•
If there is doubt about the pre-pressure and burner, see
Chapter
11 Cleaning and maintenance
.
•
Now the fireplace has been technically connected and
checked, the installation can be completed.
Replacing the batteries
There is a battery holder in the battery box with cover plate.
This includes 4 x AA batteries. When the batteries are fully
discharged, the cover plate can be disassembled and the
batteries replaced.
NOTE
Do not connect a 9-Volt block. This will cause the electronics
to fail.
There are 2 AAA batteries in the hand-held remote. The hand-
held remote indicates when it is empty.
The battery box is used in the reconstruction of the fireplace. The
battery holder is placed in here. A 3-metre cable goes from the battery
holder to the receiver. (See Chapter 5
Technical data GV60
)
Power cable
