TVD Series Multifunction Scale Scale Technical Manual
- 9 -
5 Press
key when the displayed number matches the number of items
used in the sample.
6 Scale will store the pieces according to the items.
7 It can add more pieces on the pan, display will be show the pieces according
to the stored items.
8 Press
key to display unit weight ( g / pcs) , Total weight (kg) and
quantity ( pcs).
9 Press
key to return the scale to weighing mode.
5.7 Tolerance checking
The weighing scales allow weighing items according to a target quantity or target
weight or target percentage within specified tolerances. With this function one can
also check if the weighing good is within a defined tolerance range. Reaching target
quantity is indicated by an audio sound (if enabled in menu)
Note: Check weighing or counting available only when weight more than 20d
5.7.1 Limits setting for target weight
1 Press
key to set the check weighing function in weighing mode.
2 Display will be show the indicator
to set Hi-Limit and the first digit will be
active. 000.000 kg
3 Use
and
keys to shift location and press
key to change the
limit value, and press
key to confirm.
4 Scale will be confirmed the Hi-Limit and display will be show the indicator
to set Lo-Limit and the first digit will be active. 000.000 kg
5 Use
and
keys to shift location and press
key to change the
limit value, and press
key to confirm.
6 Limits setting completed and display will return to zero,Load the weight on
platter,the check weighing control will start .
