Vision Sensing ULVIPS series, Operation Manuals

Page: 6 / 19

Operation Manual Check Y.Mito Author F.Ogawa 2012/7/2
6/19 .
SPD-1207001 V i s i on Sens i ng Co. Ltd
3: Detector 3: Detector 3: Detector 3: Detector
3.1 The careful point which is at the time of detector attachment
Please put a detector in tight like the following picture.
For UL03 162/262,UL04 272
For UL02 152
* * * * When exc When exc When exc When exc hanging a sensor, please be sure to remove after the powersupply is hanging a sensor, please be sure to remove after the powersupply is hanging a sensor, please be sure to remove after the powersupply is hanging a sensor, please be sure to remove after the powersupply is
cut.
cut. cut.
cut. When exchanging the kind of sensors, all set values which were being
When exchanging the kind of sensors, all set values which were being When exchanging the kind of sensors, all set values which were being
When exchanging the kind of sensors, all set values which were being
preserved inside the camera return to defaults. preserved inside the camera return to defaults. preserved inside the camera return to defaults. preserved inside the camera return to defaults.
3.2
3.2 3.2
3.2 Cleaning method of the window of the detector
Cleaning method of the window of the detector Cleaning method of the window of the detector
Cleaning method of the window of the detector
Please wipe up isopropyl alcohol and deionized water by soft cloth using the one
divided by 1:1.
Of a sensor, please
adjust a pin to this
point.