Operation Manual
Check Y.Mito
Author F.Ogawa
2012/7/2
17/19
.
SPD-1207001
V
i
s
i
on Sens
i
ng Co. Ltd
Sampling period setting
Sampling period setting
Sampling period setting
Sampling period setting
Sampling time when doing a picture and fixed point brightness sampling, is set.
Sampling time when doing a picture and fixed point brightness sampling, is set.
Sampling time when doing a picture and fixed point brightness sampling, is set.
Sampling time when doing a picture and fixed point brightness sampling, is set.
Setting value
Sampling period: Sampling period is set. (1-3600 seconds)
Sampling time: Sampling time is set. (1-1440 minutes)
The destination folder name for saving
The destination folder name for saving
The destination folder name for saving
The destination folder name for saving
The place where a picture and a csv file are stocked as a result of the time when a
picture and fixed point brightness sampling were performed is set.
* When starting, it's set as My Document.
Start sampling
Start sampling
Start sampling
Start sampling
Sampling is begun based on the setting item above-mentioned "sampling data
setting and sampling time setting".
* When setting above-mentioned isn't performed right, an error occurs.
Error 1: When the monitoring data isn't designated.
Error 2: When there are no coordinates sampled in sampling.
When sampling ends, the following message is indicated.
