6. Installation
6. Installation
6.3 Mounting applications
This unit provides an efficient way of mechanical adjustment of the camera
angle from any location. Especially, noticeable points are Vertical angle that
can be tilt down to 90 degree and the Rotation adjustment that can correct the
image to be always upright status when the dome camera is installed on the
wall or on the slope.
6.2 Video Monitor
Connect Video cable with BNC-male connector to the monitor.
Impedance alliance in the system connection.
Make sure to connect the cable with the power off. Please locate the
impedance switch of each equipment as instructed.
- Locate the switch to Hi-z position for the interim equipment.
- Locate the switch to 75
for the last equipment.
Set the impedance
S/W to 75
װ
position
Last equipment
(Monitor)
Interim equipment
(DVR, Multiflexer, Transmitter etc.)
Set the impedance S/W to Hi-z position.
4mm ~ 9mm
(89 ) (36 )
Ceiling
Wall
Slop
Tilt 90
90 Down
89
36
Rotation 180
Pan 360
90
89
¢“
Lens Center
Vertical angle can be tilt down to
its maximum 90 degree.
(TILT = 90°)
Horizontal angle is adjustable to its
maximum 360 degree.
(Horizontal = 360°)
Rotation angle is adjustable to its
maximum 180 degree.
(Rotation = 180°)
Summary of Contents for VD120TH-12
Page 16: ...Memo Memo ...
Page 17: ......