7. Functions and operation
7-8. DNR (Dynamic Noise Reduction)
The background noise in the low light level decreases
automatically as the level of gain changes.
1. Please position the arrow to point to ‘DNR’ on the
SETUP menu by using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing
the LEFT and RIGHT buttons.
OFF
: There is no reduction in noise level.
LOW
: There is a small reduction in noise level with almost no ghost image.
MIDDLE
: The most effective mode.There is a sufficient reduction in noise.
HIGH
: The noise is greatly reduced while ghost images are increasing.
7-9. SENS UP (Low illuminance)
SENS UP helps maintain a bright, clear screen image
by automatically detecting changes of the level of
light in low illumination.
1. Please position the arrow to point to ‘SENS UP’ on the
SETUP menu by using the UP and DOWN buttons.
2. Please select the mode you wish to operate by
pressing the LEFT and RIGHT buttons.
AUTO
: Low light level auto mode.
OFF
: The function does not operate.
7. Functions and operation
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
When AGC is turned off, ‘DNR’ does not operate.
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
When the SHUTTER is in the MANUAL mode, SENS UP does not operate.
When the AGC is turned off, SENS UP does not operate.
3. Please press the SET UP button when all the settings are completed.
7-10. SPECIAL
1. Please position the arrow to point to ‘SPECIAL’ on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
A. CAMERA ID
When you enter a CAMERA ID, the camera ID appears on the monitor.
1) Please position the arrow to point to ‘CAMERA ID’
by using the UP or DOWN button.
2) Please select ‘ON’ by pressing the LEFT
and RIGHT buttons.
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
The maximum storage magnification in low light level movement situations can be
adjusted by pressing the SET UP button in ‘AUTO’ mode. (x2~x128)
As the magnification increases, the screen gets brighter, however the ghost
images also increases.
If storage magnification is increased while SENS UP is operating, it may cause
noise, and spots may appear, however this is normal.
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
Note!
If ‘OFF’ is selected, the ID does not appear on the monitor even if it has been input.
Summary of Contents for VD120TH-12
Page 16: ...Memo Memo ...
Page 17: ......