Vision Fitness X1400, Owner'S Manual

Page: 14 / 37

9
ALL MODELS
CONSOLE HARDWARE DESCRIPTIONS
A. POWER SWITCH
Turn off power to your console if your Elliptical Trainer will not be used
for an extended period of time.
B. MILES/KILOMETER SWITCH
Changes your exercise feedback to the English or Metric system.
C. BIKE OR ELLIPTICAL TRAINER SWITCH
This console can be used on both products, so make sure the switch
is set to ELLIPTICAL mode.
D. ENTER BUTTON
Use this button in setup mode to select your program, exercise time
and resistance level.
E. START BUTTON
Press the START button to immediately begin exercising in manual mode.
F. PAUSE/HOLD TO RESET BUTTON
Use this button to STOP or PAUSE your program for up to five minutes.
Hold this button for three seconds to RESET your program.
G. UP
▲
OR DOWN
▼
ARROWS
Use these buttons to change program number, exercise time, and
resistance level in setup. During the workout use these buttons to
increase or decrease resistance.