45
CHAPTER 5: PART REPLACEMENT GUIDE
5.19 Vertical Stabilizer Arm Replacement
1) Remove the incline arm cover as outlined in Section 5.15.
2) Remove the rubber boot, then the bolt that holds the vertical stabilizer arm to the frame (Figures A & B).
FIGURE A FIGURE B
3) Remove the two bolts that hold the incline arm to the vertical stabilizer arm (Figure C).
4) Remove the vertical stabilizer arm (Figure D).
FIGURE C FIGURE D
5) Reverse Steps 1-4 to install a vertical stabilizer arm.
6) Test the Elliptical for function as outlined in Section 5.22.