37
CHAPTER 5: PART REPLACEMENT GUIDE
5.12 Dual Action Handlebar Replacement
1) Remove the plastic cover where the dual action handlebar meets the link arm (Figure A).
2) Remove the bolt where the dual action handlebar and the link arm meet (Figure B).
FIGURE A FIGURE B
3) Remove the cap by hand by turning it counter-clockwise (Figure C).
4) Remove the 4 screws that hold the dual action handlebar to the console mast (Figure D).
FIGURE C FIGURE D
5) Reverse steps 1-4 to install a new dual action handlebar.
6) Test the Elliptical for function as outlined in Section 5.22.
