27
MAINTENANCE
MAINTENANCE
Troubleshooting
Taking care of your EVO Cam II
Do not touch the lens. Dirt on the lens will appear as a blurred or dim image or as fuzzy spots on the screen. If you believe the lens is dirty, it can be cleaned with a
soft, dry cloth applying minimal pressure. As the lens is polished and coated, do not use a wet or coarse cloth, avoid detergents and abrasive substances or solvents to
clean it.
Never look directly at the LED light source for any prolonged period of time.
Use only the supplied power supply and inspect the cabling regularly for damage.
EVO Cam II contains a small battery to enable time and date settings to be retained while the unit is powered off. Should the battery need replacing
please contact you Vision Engineering representative who will be able to advise you.
FIRMWARE UPGRADE
Firmware upgrade
EVO Cam II includes a Firmware Upgrade Function allowing users to install new versions of the firmware.
Any update files will be provided directly from Vision Engineering.
`
Place upgrade file on USB stick
`
Insert stick into EVO Cam II
`
Ensure EVO Cam II is in Standby State (e.g. unit is powered on at the mains, but not switched on and the power LED is not lit)
`
Hold down Zoom In + Zoom Out, then simultaneously press the Power button until front panel LED starts flashing red.
`
The flashing will stop when software update is complete
`
Power off the unit at the mains and switch on again.
`
Unit can be powered on as usual
`
Verify the software update by checking the unit software version number (navigate on the menu to the information text option (i) and press the overview
button while the (i) is highlighted)
Exit
Contents
Preface
Assembly
Operation
Maintenance
Specification
System Diagram
Start page
Summary of Contents for EVO Cam II
Page 1: ......