vicosys
®
6300
Important Information
1.4 Qualified Personnel
The device may only be assembled, commissioned, operated, maintained, installed, set up,
cleaned, repaired and transported by qualified skilled personnel.
A qualified person is deemed to be someone who has been trained and instructed for his/
her activities with the device, and who has proven his/her capability to the purchaser. The
operating personnel must be authorised by the purchaser for those activities at the device.
For the installation and operation of the device, the skilled personnel must know and comply
with the applicable guidelines and standards for handling control equipment, electrical
installations and working materials.
1.5 Warranty and Liability
The contents of this document have been checked carefully and correspond to current
legislation and best practise at the time of going to press.
However, the manufacturer shall not be liable for any damage arising from the use of this
edition of the manual, and rejects any warranty derived therefrom.
Within the bounds of the legal requirements, the manufacturer shall only be responsible
for the technical safety characteristics of the device if the maintenance, repairs and
modifications to the device are performed by himself or by authorised skilled personnel in
accordance with his instructions.
Loss of warranty
The manufacturer shall accept no liability or warranty in the event of improper use, opening
of the device or incorrect maintenance.
© Vision & Control GmbH 2022
999.995.428.10-en-2.1
7
