Vision & Control 1-33-009, Installation And Operating Instructions Manual

Page: 14 / 32

R-CLR-69x41-IR860-SL
Installation and Mounting
14 © Vision & Control GmbH 2017
170
127_99
9.994
.719.10
-e
n-
1
.0
5.1 Mounting the Device
To mount the device four M3 tapped holes (2) are located on the rear of the
device.
There are also three threaded pins (1) attached to the side for mounting
accessories.
A 1.5 mm-allen key is needed to mount the accessories (not part of the scope
of delivery).
Figure 4: Position of the mounting holes and threaded pins
1 3 x M2.5 threaded pins
to mount the adapter rings
2 4 x M3 threaded holes (on rear side)
Maximum screw-in depth: 4.5 mm
(exact position:
see "Dimensional Drawing" on page 11 )
2
Rear side
2
1