SC30 connection to DRS Gearbox and NN3D
(15 or 30 meter antenna cable)
Ethernet/Power
Use the included 3 hole
gasket for this
installation application.
DRS Connector
close-up
Inside DRS Gearbox
Connect the wires to the gray N2K
terminal inside the DRS Gearbox.
Match the wire colors to the colors shown
in the DRS Connector close-up.
The Purple, Yellow and Green wires in this
cable are not used for this connection.
They need to be cut back, isolated and
taped so they don’t short to any other
wires and cause equipment damage.
N2K: SC30 Backbone cable
15 meter = 000-166-891
30 meter = 000-166-892
(One terminator resistor is
embedded in the SC30
connector end of these
optional cables)
Terminator Resistor
120
Ω
000-167-746
(supplied)
Attach crimp-lug to shield
wire in N2K cable and fasten
to screw on radar T/R
chassis shown in image
above and below.
