Switching on for the very first time after assembly
9
Press the power switch
on the far left of the control unit below the monitor for
about a second. As soon as the lighting switches on, you can release the switch.
The monitor also switches on immediately. (Note: The white control lamp on the
right at the lower edge of the monitor lights up continuously.)
If necessary, the power-on-switch of the monitor is directly under the control
lamp. You can place your finger on the lower right edge of the screen and move it
to the left until you feel the slight bump of the power button. After pressing this
button, the power-on control lamp lights up white. VISIO 24 from now automati-
cally switches on the monitor.
Picture 3
These steps only need to be done when switching on for the first time after deliv-
ery. Then it is sufficient to switch VISIO 24 on and off on its control unit.
Screen Power-LED
Lights up when switched on
No light when switched off
Screen Power Botton
Screen control buttons
