Vishay P3 Instruction Manual Download Page 22

Page: 22 / 65

- 18 -

4.4.1.6

Backlight

While in the run mode, pressing the Backlight

key will

illuminate the backlight for the duration specified in the back-
light options menu.

4.4.2 Command Mode Operation

The command mode is entered when the user is in the run mode

and the

MENU

, key is pressed, or the

key

is pressed when the record mode is off.
Pressing the Menu

MENU

key will display the Main Menu (see

section 4.5.1).

Pressing the Select Channels

key will display the select

channels menu (section 4.5.2).

Pressing the Bridge Type

key will display the Bridge

Type Menu (section 4.5.3).

Pressing the Gage Factor/Scaling

key will display the

Gage Factor/Scaling Menu (section 4.5.4).

4.5 Menu

Commands

4.5.1 Main

Menu

The Main menu is displayed when the

MENU

key is pressed while

in the run mode. When the main menu appears, all measurement

activity is suspended. Use the and arrow keys to highlight
the desired menu item. Choose the desired item by pressing the

MENU

key.

Summary of Contents for P3


































































Search results

Summary of Contents for P3

Reviews:

Related manuals for P3

Brands by name

Popular brands

Vishay P3, Instruction Manual

Search results

Summary of Contents for P3

Reviews:

Related manuals for P3

Brands by name

Popular brands