viscount Vivace
1
2
3
4
5
6
1. S button (Set):
this button is used to activate the memories and Tutti save function.
2. Memories (HR; 1 - 2 - 3 - 4 - 5 - 6):
all selections made with the tab registers including the sections MIDI and
Couplers can be memorized. To do this press the SET (S) button, and keep it pressed while pressing one of the 6
memory buttons to select the memory where this combination of registers is to be saved.
Memories include a
push-button
marked
HR
(it can be also called
0
). This memory memorize temporarely the last
configuration present at time when the piston was switched on.
3. ENC button (Enclosed):
after this button has been pressed, the MAN.II expression pedal can be used to control
the general volume of the entire organ.
4. A.P button (Automatic Pedal):
by pushing the A.P. piston, you will play the pedalboard registers on the first 32
keys of the Great. These registers will become monophonic with priority on the lowest note. When utilizing this
function, the pedalboard will not play.
5. T button (Tutti):
the
Tutti
enables a series of preset registers. To store a new configuration of Tutti, first of all
activate the function by pressing the T button, then modify the configuration of the registers as you prefer. To save the
new setting, keep the S (set) button pressed and press the HR button of the memories section.
4. CONTROLS ON THE MANUALS
N.B.
The Tutti does not activate the modulation voices, the tremolos and the Vox Celeste.
Function Set + Cancel:
when the MIDI is connected to another VISCOUNT organ, the activation of a
register on the transmitting organ will (through the sending of an exlusive system message) activate the
same register on the receiving organ.
If you wish that some registers will not play on the transmitting organ but, when selected, will play only on
the receiving organ, you have to follow this procedure:
-
Press Set (S) piston and at the same time Cancel (C): all tabs will be on.
-
Switch off the tabs you do not wish to sound on the receiving organ.
-
Press again Set + Cancel.
6. C button (Cancel):
by pushing this piston the HR piston will be on and the activated registers will be off.
13
