manualshive.com logo in svg

Viscount DB-5, Operating Manual, Page: 17 / 46

Share
Download
Viscount DB-5 Operating Manual Download Page 17

57

If you wish to abort the Memory saving operation, press [EXIT] from the previous video
page.

If you wish to restore the original contents of one or all the memories, locate the cursor on
the 

[Memory INIT]

 field and press the [ENTER] button. The display will change to:

The 

Memory INIT

 field displays the memory location on which the Factory Settings

operation will be carried out if the [ENTER] button is pressed. You can use the [-/NO] and
[+/YES] switches to scroll through all 50 Memories. After [ENTER] is pressed the display
will show:

by which the OB5 asks you to confirm the initialisation procedure. Press the [EXIT] button
to abort the procedure, or [ENTER] to carry out the Factory Settings operation on the
Memory in question, in which case the display will show:

to confirm that the operation has taken place.

If you wish to carry out a Factory Settings procedure on all the memories, in the

video page select the 

[INIT ALL]

 field and press the [ENTER] button.  The display will

request confirmation to proceed with total initialisation of the Memories:

Summary of Contents for DB-5















































Reviews:

No comments