13 / 36
eco-DUO330
4
Operation
4.1
Initial commissioning
All activities described below may only be carried out by qualified staff.
When delivered, the stator is not installed so as to avoid bearing damage to the elastomer of
the stator.
4.1.1
Dismantling the dispenser
Remove the 2 screws (9).
Remove the locking plate (11) and eccentric ring (10).
Remove the 4 screws (9).
Remove the centring cover (8).
Tip:
If the eccentric ring (10) cannot be easily removed (stuck with material), then
• use a screwdriver to lever it up at the recesses (C), or
• evenly screw the screws (9) into the threaded holes (D) to press it off
9
9
11
10
8
9
9
D
C
Fig. 2
