manualshive.com logo in svg

Visco IT-OUT 201-1, User Manual

Share
Download
Visco IT-OUT 201-1 User Manual Download Page 2

Contents 

 

1. Parts and functions ........................................................................................... 3 

2. Terminal Descriptions ....................................................................................... 3 

3. Specifications .................................................................................................... 4 

4. Mounting .......................................................................................................... 4 

5. System Wiring and Connections ....................................................................... 6 

6. Setup ............................................................................................................... 12 

7. Cable Requirements ....................................................................................... 15 

 

! Please read this manual carefully before using the product, and keep it well. 

www.viscoo.eu

 

www.viscoo.eu

 

7. Cable Requirements

 

The maximum distance of the wiring is limited in the 2-wired system. Using different cables may 
also affect the maximum distance which the system can reach.

 

Summary of Contents for IT-OUT 201-1









Reviews:

No comments

Brands by name

Popular brands

Load more brands