4 of 5 pages
Batmink Distribution, Beckery Road, Glastonbury, Somerset, Tel: 01458.833186
www.batmink.co.uk
Operation by IR remote:
You can also operate this product by IR remote,
the distance available is at most 10M.
Notice: IR remote is ready to control the product which is in any working mode.
The picture of the IR remote
AUTO RUN mode
Press “AUTO RUN” to choose Auto run mode. Press FLASH to turn on/off the flash of the Auto Run, and then pressing
“+” and “-“ buttons to adjust flash speed. Press SPEED to control the speed of the Auto Run, and then pressing “+” and
“-“ buttons to adjust it.
Select program Mode
1. Press PROG to go in to set built-in program mode, and then pressing “+” or “-” to select built-in program (it is useful
without pressing FLASH /SPEED).
2. Press FLASH to turn on/off flash and press “+” or “-” to adjust the flash speed. Press SPEED to set the program
running speed and press “+” or “-” to adjust it.
Notice: “ Pr.01” is static color program. There are 8 colors to choose from. Press the SPEED button to enter the static
color submenu, and then pressing “+” and “-“ buttons to scroll through the static colors.
M/S mode
Press SL to display SLAV mode. The R/G/B lights are off when without master light.
Sound Active mode
Press SA to display sound active mode, and pressing “+” and “-” buttons to adjust sensitivity level.
Select light program mode
Press R/G/B to choose program mode, and pressing “+” and “-” buttons to adjust the intensity of the light. Press
FLASH to turn on/off flash effect to in this situation, pressing “+” and “-” buttons to adjust the flash speed.
DMX MODE
Press D to display DMX mode. The R/G/B lights will flash 2~3 times. Then pressing “+” and “-” buttons to select the
two DMX mode, when the red light is on, it is in the DMX mode 1;when the green light is on, it is in the DMX mode 2.
