2 of 5 pages
Batmink Distribution, Beckery Road, Glastonbury, Somerset, Tel: 01458.833186
www.batmink.co.uk
color submenu, the LED display shows “CL.-X” Use the UP or DOWN buttons to scroll through the static colors.
3. Auto run mode
Press “MODE” button, ”AUTO.” is displayed, the built-in programs run one after another in continuous loop. Under this
mode, press “SETUP” button to select, the color jumping speed and flash speed. when “SP.XX” is displayed, press “UP”
or “DOWN” to set the color jumping speed(1-99).When ”FS.XX” is displayed, press “UP” or “DOWN” button to adjust
the flash speed(0-99), ”0”is turn off flash.
4. Sound mode
Press “MODE” button ”SU.XX” is display, and then press “UP” or “DOWN” button to set the sound level (0-31),under
this mode, the “SETUP” button is no available
5. Slave mode
Press “MODE” button ”SLAU.” is displayed, under this mode “ SET UP”, “UP” and “DOWN” are all not available.
6.DMX mode
Press “MODE” button, it has two mode, when “d.XXX” or ”d-P.X” is displayed. Press “SETUP” to choose the DMX
address or DMX mode, When “d-P.X”is displayed, press “UP” or “DOWN” button to select the two DMX modes. When
“d.XXX” is displayed, press “UP” or “DOWN” to select the DMX address 1-512.When there is no controller signal, the
display will be flash.
1．
）DMX mode 1：
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
Dimmer
Strobe
Color Select
Program Select
Speed
Sensitivity
Red
Green
Blue
0-255
(dim
→
bright)
0-10=OFF
11-255=
ON
(slow
→
quick)
221-255 RGB
186-220 GB
151-185 RB
116-150 RG
81-115 B
46-80 G
11-45 R
0-10 OFF
236-255 Auto-run
216-235 program12
196-215 program11
176-195 program10
156-175 program9
136-155 program8
116-135 program7
96-115 program6
76-95 program5
56-75 program4
36-55 program3
16-35 program2
0-15 OFF
0=stop
1-255=
ON
(slow
→
quick)
0-7=OFF
8-255=ON
(insensitive
→
sensitive
)
0-255
(dim
→
bright)
0-255
(dim
→
bright)
0-255
(dim
→
bright)
