5 of 6 pages
11
190-208
Double
direction
section flow
12
209-227
Fifteen color
mixing
13
228-246
Auto-run
14
247-255 Sound-active
sensitivit
y
1-255
insensitiv
e to
sensitive
No
functio
n
Operation by IR remote:
You can also operate this product by IR remote,
the distance available is at most 10M.
Notice:IR remote is ready to control the product which is in any working mode.
The picture of the IR remote
AUTO RUN mode
Press “AUTO RUN” to choose Auto run mode.Then press “AUTO RUN” again to enter the auto loop times
selection mode,pressing “+” and “-“ buttons to select the auto loop times from 1 to 100.
Select program Mode
1. Press PROG to go in to set built-in program mode,and then pressing “+” or “-” to select 12 built-in programs (it
is useful without pressing FLASH /SPEED).
2. Press FLASH to set the program fade speed and press “+” or “-” to adjust it. Press SPEED to set the program
jumping speed and press “+” or “-” to adjust it.
Notice: “ Pr.01” is static color program. There are 15 colors to choose from. Press the SPEED button to enter the
static color submenu,and then pressing “+” and “-” buttons to scroll through the static colors.
M/S mode
Press SL to display SLAV mode. The R/G/B/W lights are off when without master light.
Sound Active mode
Press SA to display sound active mode, and pressing “+” and “-” buttons to adjust sensitivity level.
Select light program mode
Press R/G/B/0 to choose the different four colors,and the button “0” is for adjust the intensity of the white
light,then pressing “+” and “-” buttons to adjust the intensity of the corresponding light.
DMX MODE