![background image](http://html1.mh-extra.com/html/visage/vis046-1/vis046-1_user-manual_1030632004.webp)
Visage Lighting & Effects
and device
The ambient temperature must always be between –5ºC and +45ºC
The relative humidity must not exceed 50% with an ambient temperature of 45ºC.
This device must only be operated in an altitude between -20 and 2000 m over NN
The minimum distance between light-output and the illuminated surface must be more than
0.1 meters.
This device is only allowed for an installation via mounting bracket. In order to safe guard
sufficient ventilation leave 50 cm of free space around the device.
The installation of the device must be built and constructed in a way that can hold 10 times
the weight for 1 hour
When installing the device, make sure there is no highly flammable material (i.e. decorations)
within a distance of a minimum of 0.5m
IMPORTANT OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE OF INSTALLTION, including
(but not limited to):
calculating working load limit
periodic safety inspections of all installation materials being used with the device
safe install areas out of reach of people if the device is lowered from the ceiling or high points
professional trussing systems must be used at all times with secure clamps
secure installation to ensure the device does not swing freely
the use of safety rope at least 12 times the weight of the fixture
A maximum drop distance never exceeding 20cm
FIRE SAFETY
Connection cables are as follows:
Cable
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
INSTRUCTIONS FOR USE
DMX – 512 connection. Wires must not come into contact with each other, otherwise only use a
stereo shielded cable and 3-pin XLR plug and connector in order to connect the controller with the
fixture, or one fixture with another XLR connector.
DMX-input
DMX-output
XLR mounting - socket XLR
XLR mounting - socket:
1. Ground
1. Ground
2. Signal(-)
2. Signal(-)
3. )
3. )