Virutex TM33W, Operating Instructions Manual, Page: 9 / 48

9
Symbol Meaning
Danger area! Keep hands, fingers or
arms away from this area.
Symbol for use of the mitre saw as a
chop and mitre saw.
Symbol for use of the mitre saw as a
table saw.
1. TECHNICAL CHARACTERISTICS
Input power...................................................1500 W
Motor.........................................................50/60 Hz
No-load speed..........................................3700/min
Type of laser.......................................................................650 nm
<5 mW
Laser class................................................................................3 R
Dimensions of saw disc:
External diameter.........................................300 mm
Internal diameter............................................30 mm
Revolving table:
Adjustable, right and left to 45° with fixed stops at 0°,
15°, 22,5°, 30° and 45°.
Tilting head:
Can tilt from 90 to 45° at any position of the revolving
table from 0° to 45° to the left of the same.
Weight.............................................................20 kg
Packing dimensions.....................590x580x450 mm
Weighted equivalent continuous
acoustic pressure level A...................................................96 dBA
Acoustic power level A....................................................107 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
h
: 3 m/s
2
Uncertainty....................................................................K: 1.5 m/s
2
2. MAXIMUM CUTTING CAPACITY
-Cut at 0°x 0° (Fig. 25).......................160x95 mm
(with 36 mm supplement).........................200x45 mm
-Cut at 0°x45° (Fig. 26).............................160x64 mm
-Cut at 45°x0° (Fig. 27)............................110x95 mm
-Cut at 45°x45° (Fig. 28)...........................75x64 mm
-Cut on upper table (*)...............................max 55 mm
(*) Only for model TM33W
3. SAFETY ELEMENTS
3.1 ON/OFF BUTTON
The machine has a push-button switch located on the
handle and a locking button for work with a raised table.
For parting purposes, press the switch button while
activating lever B1 (Fig. 1) so that when pressure is
stopped, the machine comes to an automatic halt.
This safety device eliminates the need for pressing the
switch button continually while the parting process is
in progress, thus facilitating your work.
For cutting with the raised table, lock button E1 (Fig.
8) and press the stop-start buttons on the switch. The
button will unlock automatically when the machine is
set as a parting tool.
3.2 MECHANICAL PROTECTION
When the saw blade is not in use it is totally covered by
the protectors and the machine is locked in this position.
Lever B1 (Fig. 1) releases the machine before it is lowered.
Ensure that the saw blade is totally
covered by the protectors when not in
use. Always keep the protectors in good
condition.
3.3 PROTECTION AGAINST ACCIDENTAL STAR-
TING RESULTING FROM CUT OFF OF ELECTRICITY
This interrupts the circuit and prevents the machine from
being accidentally switched on when power is restored,
even though the locking switch may still be on.
To restart the machine, press the start switch.
3.4 PROTECTION AGAINST SHORT CIRCUITS
The machine's circuit includes a T1 fuse (Fig. 8) which
protects it from short-circuiting and overloading.
The fuse is located on the machine handle. Should it
have to be replaced, unscrew the lid of the fuse box and
remove the burnt-out fuse. Replace it with another one
of the same type (5x20 10A, type T).
4. UNPACKING THE MACHINE
Contained in the case you will find the following
elements:
- Tiltable mitre saw according to model (TM33W-TS33W)
- 8 mm size Allen key
- Wood regulation stop equipment
- Pusher (only TM33W)
- Instruction manual and parts sheets
- General safety instruction leaflet
- Other documentation
5. PREPARING YOUR MACHINE