Loader assembly
Remove nuts A, washers B and screws C
from their housing.
Position loader D and attach with nuts A,
washers B and screws C.
Make sure that loader belt rollers E turn
freely.
B
A
D
C
E
UNPACKING, INSTALLATION AND PRIOR ASSEMBLIES
1) Unpack and install the machine as per the paragraphs 4.1,
4.2 and 4.3 of the instructions manual.
2) Proceed with the prior assemblies (SEE PART "ASSEM-
BLIES").
3) Connect the machine to the mains as per the paragraph 4.5
of the instructions manual.
4) Proceed to connect the machine to the compressed air
source as per the paragraph 4.6 of the instructions manual.
5) Connect the dust collector pipe (1), as per paragraph 2 of
the annex to the instructions manual.
6) Unlock the compressed air valve (3) and be sure that the
machine has at least a pressure of 6 bar, showed on the pres-
sure indicator.
7) Switch on the machine by means of the main switch (5).
Wheel assembly
Mount the crank A on the wheel B, using
the service key.
ASSEMBLIES
8 -
EB140PLC Premilling
/ Quick start guide
