Virtus NERONE 595-4 User And Maintenance Manual Download Page 3

IT | 

NERONE

 | Manuale d’uso e manutenzione

2

ITALIANO

RAEE - Gestione rifi uti apparecchiature elettriche ed elettroniche

Il simbolo del bidone barrato posto sul prodotto o sulla documentazione del manuale d’uso, indica che il prodotto è stato immesso nel 

mercato dopo la data del 13 agosto 2005. Al termine del ciclo di vita utile, il prodotto, deve essere raccolto, smaltito, trasportato in modo 

separato rispetto agli altri rifi uti urbani seguendo le normative vigenti in ogni paese. In questo modo potrà essere recuperato contri-

buendo ad evitare possibili effetti negativi sull’ambiente e sulla salute, favorendo il reimpiego e/o il riciclo dei materiali di cui è composta 

l’apparecchiatura. Lo smaltimento abusivo del prodotto da parte dell’utente comporta l’applicazione di sanzioni amministratiuve previste 

dalla norma vigente. La Direttiva comunitaria RAEE N° 2002/96/CE, (in Italia recepita con il Dgls del 15.05.2005 N°151); Direttiva 

comunitaria N°2003/108/CE riguardante il trattamento dei rifi uiti delle apparecchiature elettriche ed elettroniche. 

ENGLISH

RAEE - Electrical and Electronic Waste Management

The barred can symbol displayed on the product or in the use manual documentation indicates that the product has been placed for 

sale on the market after August 13, 2005. At the end of its useful life-cycle, the product must be collected, disposed of, and transported 

separately from urban waste, in accordance to the norms in force in each individual country. In this way, it can be recovered, contributing 

to avoid possible negative effects on the environment and health, and favoring the re-use and/or recycling of the materials of which the 

equipment is made of. The abusive disposal of the product by the user entails the application of administrative sanctions established by 

the norms in force. The EU Directive RAEE N. 2002/96/CE, (implemented in Italy by the Law Decree n. 151 dated May 15, 2005); EU 

Directive N. 2003/108/CE concerning the handling of electrical and electronic waste.

FRANCAIS

RAEE - Gestion des déchets d’appareillages électriques et électroniques   

Le symbole de la poubelle barrée placé sur le produit ou sur la documentation du manuel d’utilisation, indique que le produit a 

été mis sur le marché après la date du 13 août 2005. A la fi n du cycle de vie utile, le produit doit être trié, éliminé, transporté de 

façon séparée par rapport aux autres déchets urbains en suivant les normatives en vigueur dans chaque pays. De cette façon, 

il pourra être récupéré en contribuant à éviter d’éventuels effets négatifs sur l’environnement et sur la santé, en favorisant 

le réemploi et/ou le recyclage des matériaux dont est composé l’appareillage. L’élimination abusive du produit de la part de 

l’utilisateur comporte l’application de sanctions administratives prévues par la normative en vigueur. La Directive communau-

taire RAEE N° 2002/96/CE, (en Italie défi nie dans le D. lég. du 15.05.2005 n°151); Directive communautaire N° 2003/108/CE 

concernant le traitement des déchets des appareillages électriques et électroniques.

DEUTSCH

RAEE - Umgang mit Abfällen elektrischer und elektronischer Geräte   

Das Symbol der durchkreuzten Mülltonne auf dem Produkt oder der Dokumentation der Gebrauchsanweisung gibt an, dass das Produkt 

nach dem 13. August 2005 auf den Markt gebracht wurde. Am Ende des Nutzungszyklus muss das Produkt entsprechend der im jeweili-

gen Land geltenden Bestimmungen gesammelt, entsorgt und getrennt von anderem Hausmüll transportiert werden. Auf diese Weise kann 

es zurückgewonnen werden, wodurch zur Vermeidung möglicher negativer Auswirkungen auf die Umwelt und die Gesundheit beigetragen 

sowie die Wiederverwertung und das Recycling der Materialien erleichtert wird, aus denen das Gerät besteht. Die widerrechtliche Entsor-

gung des Produktes durch den Nutzer zieht die Anwendung der von den gültigen Bestimmungen vorgesehenen Verwaltungsstrafen nach 

sich. Die gemeinschaftliche Richtlinie RAEE Nr. 2002/96/EG, (in Italien mit der Gesetzesverordnung Nr. 151 vom 15.05.2005 umge-

setzt); Gemeinschaftliche Richtlinie Nr. 2003/108/CE bezüglich der Behandlung von Abfällen elektrischer und elektronischer Geräte.

ESPANOL

RAEE - Gestión de los residuos de aparatos eléctricos y electrónicos  

El símbolo del bidón barrado en el producto o en la documentación del manual de utilización, indica que el producto, ha sido introducido en 

el mercado después de la fecha 13 de Agosto del 2005. Al fi nal de su ciclo de vida, el producto debe ser recogido, eliminado y transportado 

de forma separada respecto a los otros residuos urbanos, siguiendo la normativa vigente en cada país. De este modo podrá ser recuperado 

contribuyendo a evitar posibles efectos negativos en el medio ambiente y en la salud, favoreciendo así la reutilización y/o el reciclaje de los 

materiales que componen el aparato. La eliminación ilegal del producto por parte del usuario, supone la  aplicación de sanciones admini-

strativas previstas en la normativa vigente La Directiva comunitaria RAEE N° 2002/96/CE, (en Italia se acoge al Decreto Legislativo del 

15.05.2005 nº.151); Directiva comunitaria N° 2003/108/CE respecto al tratamiento de los residuos de los aparatos eléctricos y electrónicos. 

PORTUGUÊS

RAEE - Resíduos de Equipamentos Eléctricos e Electrónicos 

O símbolo do contentor de lixo barrado com uma cruz, aposto no produto ou no manual de utilização, indica que o produto foi colocado 

no mercado a partir de 13 de Agosto de 2005 e que, no fi m do seu ciclo de vida, deve ser recolhido, eliminado e transportado de modo 

separado respeito aos outros resíduos urbanos e em conformidade com as normativas vigentes em cada país de utilização. Agindo dessa 

maneira estará contribuindo para evitar possíveis efeitos negativos no ambiente e na saúde, favorecendo a reutilização e/ou reciclagem dos 

materiais de que é composta a aparelhagem. Uma eliminação incorrecta e abusiva do produto por parte do utilizador implicará a aplicação 

das sanções administrativas previstas pela normativa vigente. Directiva comunitária RAEE N°2002/96/CE, em Itália acolhida pelo D.L. nº 

151 de 15 de Maio de 2005, e Directiva comunitária N°2003/108/CE, relativas ao tratamento dos resíduos de equipamentos eléctricos 

e electrónicos.

Benvenuto

Vi ringraziamo per aver scelto un nostro prodotto. 
Invitiamo a leggere attentamente il presente  manuale di uso e manutenzione
per assicurarvi l'utilizzo ottimale del Forno.

RAEE
WEEE

RAEE
WEEE

RAEE
WEEE

RAEE
WEEE

RAEE
WEEE

RAEE
WEEE

Summary of Contents for NERONE 595-4



























































































Reviews: