VirtuFit Water Resistance Row 900
6
EN
I. Slide the Seat (31) onto the rail (3).
II. Insert Rear end cap (97) into Rail (3), then secure with two Screws (98).
III. Secure the two stoppers (13) onto the Rail (3) with two Bolt (71) and Washer (Ø6) (79).
IV. Attach the Rear stand (4) to the rail (3) with four bolt (M8*15) (69) and washer (Ø8) (78)..
STEP 1
ASSEMBLY INSTRUCTIONS
Missing parts:
If you think you are missing certain parts in your package, carefully check the styrofoa and
the treadmill. Some parts (bolts, screws, etc.) are already attached to / in the treadmill.
Error message:
Make sure that all cables are carefully attached. The aluminum legs are very sensitive and
should remain straight. Do you get an error message after mounting your rowing machine? Then you
should bend these copper feet straight again, this may cause the error message to disappear.
Allen bolts:
this way you prevent the head of the socket head from being turned.
7
ASSEMBLY INSTRUCTIONS
3
31
69
69
4
98
97
71
71
13
79
13
79
78
78
STEP 1
Slide the Seat (31) onto the rail (3).
Insert Rear end cap (97) into Rail (3), then secure with two Screws (98).
STEP 2
Secure the two stoppers (13) onto the Rail (3) with two Bolt (71) and Washer (Ø6) (79).
STEP 3
Attach the Rear stand (4) to the rail (3) with four bolt (M8*15) (69) and washer
(Ø8) (78).
