VIRTUFIT VFWALP100 User Manual Download Page 6

Page: 6 / 24

ENGLISH

•

Repairs must be carried out by a professional technician,

unless otherwise specified by the supplier or manufacturer.

•

To avoid slipping during exercise, the treadmill belt should

  not be too loose. To avoid abrasion between the roller and
  the treadmill and to ensure proper operation of the machine,
  the treadmill should not be too tight. The distance between
  the step and the belt can be adjusted. The distance between
  the step and the belt should be 50 to 75 mm on both sides.

Cleaning

General cleaning of the unit will extend its life. Keep the appliance
clean by dusting it regularly. Regular maintenance will prolong the life
of your appliance and prevent injuries! For more information, please
visit https://www.virtufit.nl/service/faq/

CAUTION!

Wear clean shoes to reduce the risk of soiling the

machine. At least once a year, remove the cover to remove dust.

LUBRICATING THE TREADMILL

The treadmill is equipped with a low-maintenance, pre-lubricated
treadmill. Wear and tear on the treadmill plays an important role in the
operation and life of the treadmill, so it should be lubricated periodically.
We recommend that you inspect the belt regularly. Contact us as soon
as you notice any damage to the treadmill.

Recommended lubrication of the treadmill

•

Low usage (less than 3 hours per week):

once a year.

•

Medium use (3 to 5 hours per week):

every six months.

•

Heavy use (more than 5 hours per week):

every three months.

As a general rule:

Lubricate if the mat appears dry. If in doubt, contact

the manufacturer. The use of Vaseline (acid-free) or silicone oil is
recommended for lubricating the treadmill.

Instruction

• Lift the mat.
• Apply two to three drops of silicone oil along the length of the

treadmill.

• Turn on the treadmill and run for three minutes without

stressing the treadmill (i.e. without standing on the treadmill).

  screw on the right side of the end half a turn to the right and
  the screw on the left side of the end half a turn to the right as
  well. Repeat the process until the blockage is resolved (3).

Virtufit Totally Foldable TR-50i Treadmill

INKLAP INSTRUCTIES

-- Pull the pull-pin on the console handrail to fold the console carefully.

-- Pay attention to the cables and ensure that they are nog pinced.

--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up

--Place the machine leaning against the wall or place under a bed.

CAUTION: Do not allow children to touch the machine, the treadmill may fall.

FOLDING INSTRUCTIONS

1.  Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and
  ensure that they are nog pinced.
2.  Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
3.  Place the machine leaning against the wall or place under a bed.

NOTE:

Store your machine in a dry area away from children and high traffic areas as shown in the

illustration. Be sure it is secure and cannot fall onto small animals or children.

RUNNING BELT ADJUSTMENT

01. Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.

02. Running belt deviate to right:

Start the machine, set speed at 2-3 km/h without a load on the belt,

use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.

03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
turn both left and right until the jam solved (see fig 3).

Virtufit Totally Foldable TR-50i Treadmill

INKLAP INSTRUCTIES

-- Pull the pull-pin on the console handrail to fold the console carefully.

-- Pay attention to the cables and ensure that they are nog pinced.

--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up

--Place the machine leaning against the wall or place under a bed.

CAUTION: Do not allow children to touch the machine, the treadmill may fall.

FOLDING INSTRUCTIONS

NOTE:

Store your machine in a dry area away from children and high traffic areas as shown in the

illustration. Be sure it is secure and cannot fall onto small animals or children.

RUNNING BELT ADJUSTMENT

02. Running belt deviate to right:

Start the machine, set speed at 2-3 km/h without a load on the belt,

use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.

03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
turn both left and right until the jam solved (see fig 3).

Virtufit Totally Foldable TR-50i Treadmill

INKLAP INSTRUCTIES

-- Pull the pull-pin on the console handrail to fold the console carefully.

-- Pay attention to the cables and ensure that they are nog pinced.

--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up

--Place the machine leaning against the wall or place under a bed.

CAUTION: Do not allow children to touch the machine, the treadmill may fall.

FOLDING INSTRUCTIONS

NOTE:

Store your machine in a dry area away from children and high traffic areas as shown in the

illustration. Be sure it is secure and cannot fall onto small animals or children.

RUNNING BELT ADJUSTMENT

02. Running belt deviate to right:

Start the machine, set speed at 2-3 km/h without a load on the belt,

use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.

03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
turn both left and right until the jam solved (see fig 3).

MAINTENANCE

Safe and efficient use can only be achieved if the appliance is
properly installed and maintained. It is your responsibility to ensure
that the appliance is maintained regularly. Parts that have been
used and/or damaged must be replaced before the appliance is
used again. The appliance should only be used and stored indoors.
Long-term exposure to weather and temperature/humidity changes
can have a serious impact on the electrical components and moving
parts of the unit. Always unplug the power cord from the unit before
cleaning or servicing it.

Daily maintenance

• Clean and remove sweat and moisture after each use.
• Check that the unit is free of dust and dirt.
• Do not use aggressive cleaning agents and keep the device

away from moisture.

Semi-annual maintenance

• Inspect all bolts and nuts connected to the moving parts of the

unit. Tighten bolts and nuts as necessary and appropriate.

• Check the mobility of moving parts and components of the unit.

Use silicone spray if necessary and appropriate.

We recommend the following:

• Clean the unit after use.
• Use a dry cloth to clean the control panel and the areas around

the on/off switch.

• Use a soft, clean cloth and detergent to remove stubborn marks

and dirt from the unit.

• Store the unit in a safe, dry place away from heat and water.