EN
VirtuFit Indoor Cycle S2i Spinbike
20
9. RECOVER function
1. If there is no PULSE input, pressing the RECOVERY button is invalid.
2. Press this KEY once after the PULSE value is displayed:
a. TIME and PULSE function was displayed,other functions stop and cannot be displayed (Figure 22).
b. TIME value will display “0:60” seconds and start counting down (if the PULSE has no input during
the countdown, it does not affect the time of automatic shutdown), PULSE window will display actual
heart rate value. When count down to zero, it displays “FX” (figure 23, X value is 1~6), and buzzer will
sound a short time, and at the big 8 place, the heart rate value is continuously displayed, then press
RECOVERY to normal display setting (Motor returns to zero and level 1, waiting for each setting).
3. Press this KEY after “FX” is displayed ,it returns to normal setting .If press this key again, it will start
executing from first item again.
4. Pressing this KEY will be back to normal setting during RECOVERY.
FIGURE 19
FIGURE 20
FIGURE 21
FIGURE 22
FIGURE 23
CONTROL PANEL
