EN
Virtufit Indoor Cycle S1 Spinbike
13
SEMI-ANNUAL MAINTENANCE
DAILY MAINTENANCE
• Clean and remove sweat after each use Do not use aggressive cleaning agents and ensure that
the device remains free of moisture.
• Check that the device is free from dust and dirt.
• Inspect all bolts and nuts in connection with moving parts of the device, tighten as required.
• Check the mobility of moving parts and components of the use equipment, silicone spray if
necessary.
Safe and effective use can only be achieved if the device will be assembled and
maintained well. It is your responsibility to ensure that the equipment is regularly
maintained. Parts that are already used and / or damaged must be replaced before
continuing using. The spinbike may only be used indoors and stored away, prolonged
exposure to weathering and changes in temperature / humidity can have a serious
impact on the electrical components and moving parts of the spinbike.
MAINTENANCE
BATTERY
AAA BATTERIES
The screen uses two AAA batteries, which
you can replace at the back of the screen.
The batteries must be installed correctly. If
the screen is unreadable or only parts of the
image work, follow the next step: Remove
the batteries and wait 15 seconds, then
reinsert the batteries correctly.
