4. Chapter 4: Operating Duplicator without FCD Manager
4.1 Start/Stop button
Though FCD Manager is the only way of duplicator’s configuration, it is not required for operation of duplicator.
Duplicator can be operated by single Start/Stop button located at the right front side if the device.
Button act as a Start or Stop depending on a current operational state of duplicator.
If button is pressed during duplication process, it stops duplication.
4.2 LED
Once duplication starts you should see green blinking LED on each operating slave port. Different operations
such as Duplication and Verification are encoded by different blinking speed.
Blinking speed during duplication is faster then blinking speed during verification. This is done to help visually
identify current operation when FCD Manager is not being used.
When duplication is complete LED will blink very slow and Start/Stop button will light up green.
In case of any errors, red color will be lit on LEDs, blinking with the same speed as current operation.
Current Operation
Normal LED Blink Speed/Color
Error LED Blink Speed/Color
Duplication
Very Fast Green
Very Fast Red
Verification
Fast Green
Fast Red
Duplication Complete
Slow Green
Solid Red
5. Chapter 5: Logging with FCD Manager
By default all events such as card insertion, removal, duplication/verification Start/Stop, read/write errors are
being logged in
«Logs»
tab of FCD Manager. This information may help you to troubleshot card errors, track
duration and speed of duplication and monitor results.
Technical support may ask you to provide all the information from the log window.
User Manual
16
F l a s h C a r d / D r i v e D u p l i c a t o r
