3.3.1. Duplication Operation Modes
«Duplication Operation Mode»
is the most important parameter which defines primary action of duplicator.
User can choose among four primary operation modes:
• Duplicate Only
• Duplicate and Verify
• Verify Only
3.3.1.1. Duplicate Only
In
«Duplicate Only»
mode, duplicator writes data to the slave cards or drives but, does not compare the results
to the original. User must be aware that errors may occur.
«Duplicate Only»
mode should only be used when
savings in duplication time outweighs the possibility of errors.
Additional duplication parameters define whether the cards or drives have to be formatted prior to duplication
and whether File System or Binary Mode is used.
User Manual
13
F l a s h C a r d / D r i v e D u p l i c a t o r
