virtual access GW1000 Series User Manual Download Page 448

Page: 448 / 463

42: Configuring Terminal Server

_______________________________________________________________________________________________________

GW1000 Series User Manual

Issue: 2.3

Page 448 of 463

Web: GPIO Control
UCI:

tservd.@port[1].serial_mode)gpio_control
Opt: serial_mode_gpio_control

Enables or disables software control of the port mode between

RS232 and RS485. Applies only to port 1 (ttySC1) and not to

port 0.
Note: the port mode is set with the option port mode described

above.

Port mode is configured by hardware settings

(not user configurable). Set to 0 for port 0.

Enabled. Port mode is configurable by

software settings. This is applicable to serial

port 1 on devices that are capable of RS485.

Web: Speed (bps)
UCI: tservd.@port[0].speed
Opt: speed

Serial device speed in baud (bps).

9600

Range

115200; 57600; 38400; 19200; 9600

4800; 2400; 1800; 1200; 600; 300; 200;

150; 134; 110; 75; 50

Web: Word size
UCI: tservd.@port[0].wsize
Opt: wsize

Serial device word size.

Range

5-8

Web: Parity
UCI: tservd.@port[0].parity
Opt: parity

Serial device parity.

None

Even

Odd

Space

Web: Stop Bits
UCI: tservd.@port[0].stops
Opt: stops

Serial device number of stop bits.

Range

1-2

Web: Flow Control
UCI: tservd.@port[0].fc_mode
Opt: fc_mode

Serial flow control mode.

None

RTS/CTS

XON/XOFF

Web: RS485 Termination
UCI:

tservd.@port[0].rs485_line_termination
Opt: rs485_line_termination

Enables or disable RS485 termination. Applies only if port mode

is set to RS485.

Disabled.

Enabled.

Web: Auto RTS Invert
UCI: tservd.@port[0].rtsinvert
Opt: rtsinvert

Invert RTS in auto-RTS mode, if port mode is set to RS485.

Disabled.

Enabled.

Web: Keep Serial Port Always Open
UCI: tservd.@port[0].tty_always_open
Opt: tty_always_open

Keep serial port always open.

Disabled.

Enabled.

Web: RS232 Half Duplex
UCI: tservd.@port[0].hd_mode
Opt: hd_mode

Defines whether to enable special mode in the asynchronous

serial driver for communication to an externally connected V.23

half-duplex modem. Note: this setting does not enable half-

duplex mode in the serial hardware of the router.

Full duplex mode.

Half duplex mode.

Web: RTS Timeout
UCI: tservd.@port[0].rts_timeout
Opt: rts_timeout

In RS232 half-duplex mode, time in milliseconds between raising

RTS and enabling the transmitter. For use with an externally

connected V.23 modem.

30ms

Range

Web: POST RTS Timeout
UCI: tservd.@port[0].post_rts_timeout
Opt: post_rts_timeout

In RS232 half duplex mode, time in milliseconds between

dropping RTS (transmission finished) and enabling the receiver.

For use with externally connected V.23 modem.

20 ms

Range

Summary of Contents for GW1000 Series
















































































































































































































































































































































































































































































Search results

Summary of Contents for GW1000 Series

Reviews:

Related manuals for GW1000 Series

Brands by name

Popular brands

virtual access GW1000 Series, User Manual

Search results

Summary of Contents for GW1000 Series

Reviews:

Related manuals for GW1000 Series

Brands by name

Popular brands