Purpose
Interval
Procedure
5.6.8 Clean waste bucket
After every dispense the coffee residue (so called coffee cakes)
are moved into the waste bucket. Excess water from the brewer is
captured in a drip bucket, placed inside the waste bucket just
below the brewer. If an external waste bin is used, the waste
bucket is replaced by a waste guide.
Perform this procedure:
• Daily (see
on page 43).
Perform the following steps:
1. Depending on the used bucket types:
▪
B) Remove the waste bucket (with the drip bucket inside
it) from the machine, or
▪
G) Remove the drip bucket and the waste guide from the
machine.
2. Rinse the removed parts with clean warm water.
3. Dry parts completely.
4. Install the waste buckets.
▪
B) Place the drip bucket inside the waste bucket and
install both inside the machine, or
▪
G) Place the drip bucket on the left and the waste guide on
the right side in the machine.
5. Make sure the water level sensor is placed
inside
the drip
bucket.
51
Virtu CEC Medium Cabinet 70/90 CoEx® brewer User Manual 5DUCEK20M EN V2.0