Virtium StorFly 25PE, Product Manual

Page: 17 / 30

Product Specification
StorFly 25
VSFA25PxxxxG-xxx
Rev: 1.0
Tel 949.888.2444
–
30052 Tomas, Rancho Santa Margarita, CA 92688 USA
–
www.virtium.com
17
Word O/M F/V Value Description
84
M
F
F
F
F
F
F
F
F
F
4020h
Command set/feature supported extension.
15 Shall be cleared to zero
14 Shall be set to one
13-6 Reserved
5 0 = General Purpose Logging feature set not supported
4 Reserved
3 0 = Media Card Pass Through Command feature set not supported
2 0 = Media Serial Number not supported
1 0 = SMART self-test not supported
0 1 = SMART Error Logging not supported
85
M
X
F
F
F
X
V
F
V
V
V
V
F
F
F
V
V
7429h
Command set/feature enabled.
15 Obsolete
14 1 = NOP command enabled
13 1 = READ BUFFER command enabled F
12 1 = WRITE BUFFER command enabled
11 Obsolete
10 1 = Host Protected Area feature set enabled
9 1 = DEVICE RESET command enabled
8 1 = SERVICE interrupt enabled
7 1 = release interrupt enabled
6 1 = look-ahead enabled
5 1 = write cache enabled
4 Shall be cleared to zero to indicate that the PACKET Command feature
set is not supported.
3 1 = Power Management feature set enabled
2 1 = Removable Media feature set enabled
1 1 = Security Mode feature set enabled
0 1 = SMART feature set enabled
86
M
F
F
F
F
F
V
F
F
F
V
V
V
F
F
F
3400h
Command set/feature enabled.
15-14 Reserved
13 1 = FLUSH CACHE EXT command supported
12 1 = FLUSH CACHE command supported
11 1 = Device Configuration Overlay supported
10 1 = 48-bit Address features set supported
9 1 = Automatic Acoustic Management feature set enabled
8 1 = SET MAX security extension enabled by SET MAX SET
PASSWORD
7 See Address Offset Reserved Area Boot, INCITS TR27:2001
6 1 = SET FEATURES subcommand required to spin-up after power-up
5 1 = Power-Up In Standby feature set enabled
4 1 = Removable Media Status Notification feature set enabled
3 1 = Advanced Power Management feature set enabled
2 1 = CFA feature set enabled
1 1 = READ/WRITE DMA QUEUED command supported
0 1 = DOWNLOAD MICROCODE command supported
87
M
F
F
F
4022h
Command set/feature default.
15 Shall be cleared to zero
14 Shall be set to one
13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported
12 Reserved for technical report-