VIRTINS VT UltraMic-384 Hardware Operation Manual Download | Manualshive

Page: 43 / 43

background image

VT UltraMic-384 Hardware Operation Manual

www.virtins.com 43 Copyright © 2018-2020 Virtins Technology

Virtins Technology

Danger

This sign indicates that incorrect handling

could lead to serious danger causing death or

severe injury.

Warning

This sign indicates that incorrect handling

could lead to death or severe injury.

Caution

This sign indicates that incorrect handling

could lead to injury or property damage.

Safety Precautions

Before using this device, read this manual carefully to ensure that you know how to operate the VT UltraMic-384 safely and correctly. Be sure to keep
this manual on hand so that you can refer to it at any time.

Important safety instructions



Important safety instructions are indicated by symbols and text as shown below. Be sure to follow these instructions to protect yourself and others from
personal injury or damage to property.



The meanings of the symbols are as shown below.

Instructions for use



Do not leave the product where it will be subject to high temperatures and/or in direct sunlight.



Do not use organic solvent such as alcohol or thinner for cleaning.



Do not apply strong vibration or shock to the product.



Use appropriate cables

Warning



Do not disassemble, repair, or modify the product except for the instructions reported below.



Do not insert a card other than SD, SDHC or SDXC card into the recorder.

Caution



Stop using the product if you notice an abnormality such as unusual odor, abnormal sound, or smoke.



Do not leave the product where it will be subject to high temperatures.

Trademarks and registered trademarks

Microsoft, Windows, and Windows Media are registered trademarks of Microsoft
Corporation.

•

SD, SDHC, and SDXC are trademarks of SD Card Association.

•

Macintosh and iTunes are trademarks of Apple Corporation. All other brand names

and product names in this manual are trademarks or registered trademarks of
respective owners.

Conformity declaration

model: VT ULTRAMIC-384

VT UltraMic-384 is in conformity with the protection and

compliance requirements of the following EC Directives:



- 2004/108/CE



- 2006/95/CE

«
...
41
42
43

Summary of Contents for VT UltraMic-384












































Reviews:

No comments

Related manuals for VT UltraMic-384

EXPEDITION XP40iw

Brand: Samson Pages: 2

Brand: Samson Pages: 40

Brand: Takstar Pages: 16

Brand: JTS Pages: 28

Brand: Sennheiser Pages: 60

Brand: Toa Pages: 2

Brand: Toa Pages: 1

Brand: Shure Pages: 2

Brand: Shure Pages: 11

Brand: Shure Pages: 31

UHF WIRELESS microphone system

Brand: Shure Pages: 36

Brand: Shure Pages: 12

Brand: Shure Pages: 15

Brand: Shure Pages: 7

Microflex MX415DUAL

Brand: Shure Pages: 10

Brand: Shure Pages: 20

Brand: Shure Pages: 2

Brand: Shure Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands