VT UltraMic-384 Hardware Operation Manual
www.virtins.com 32 Copyright © 2018-2020 Virtins Technology
Virtins Technology
!
The battery voltage must be over 2.5 V, if below it must be replaced with a CR1220 3V battery.
CONNECT
In order to connect the VT UltraMic-384 to your
smartphone you need to:
1
- unplug the mic
2
– insert an empty and formatted SD card 3 – start
the app
4 – click on “
Scan and Connect
” button 5 – power
the mic
Once connected you’ll got a screen like this one.
“
Conf Erase
” deletes the configuration previously
stored in the mic.
“
Send Time
” synchronizes the current time and date
with the clock of the VT UltraMic-384.
“
Get Mic Info
” updates this page with the data
grabbed from the mic.
“
Audio Level
” will show a little graph with the signal
captured by the MIC. The graph is updated with real
time sample on which are applied the chosen HP
filter.
Below this button there are info read from the
Mic
.
After the date and time there will appear two icons:
The first one
means that inside the Mic there is a “Mode Timer”
configuration and the second a “Mode Repeat”
configuration. Tap on this icons to import the
Mic
configuration.
If the SD card free space is equal to zero then the SD card is not correctly recognized.
Only when “
Send Config.
” Is pressed the actual configuration is stored in the microphone and it will start
the scheduling!