2
1.877.4VPULSE or www.virginpulse.com
IMPORTANT SAFETY INSTRUCTIONS
1.
Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2.
Retain Instructions - The safety and operating instructions should be retained for future reference.
3.
Observe All Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4.
Follow Instructions - All operating and use instructions should be followed.
5.
Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and the like.
6.
Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the
manufacturer.
6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to overturn.
7.
Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended
by the manufacturer.
8.
Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings;
or, placed in a built-in installation, such as a book case or cabinet, that may impede the flow of air through the ventilation openings.
9.
Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
10.
Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions
or as marked on the appliance.
11.
Grounding or Polarization - Precautions should be taken so that the grounding or polarization means of an appliance are
not defeated.
12.
Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs and at the point where they exit from the appliance.
13.
Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
14.
Power Lines - An outdoor antenna should be located away from power lines.
15.
Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and
built up static charges. Section 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the
grounding electrode. (See Figure 1).
16.
Unused Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long period
of time.
17.
Object and Liquid Entry - Care should be taken so that
objects do not fall, and liquids are not spilled, into the enclosure
through openings.
18.
Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled, into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
19.
Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.