13
1.877.4VPULSE or www.virginpulse.com
INSTALLATION
Turning the Unit On
Your VP-10 is in the standby condition (STANDBY indicator lights) when the AC power
supply cord is connected.
1. Press STANDBY/ON button (on unit or remote) to turn ON the unit.
2. Press FUNCTION button to select the desired feature. The
corresponding feature mode will appear on unit’s fluorescent
display. If DVD is selected, the DVD logo (start-up picture) will
appear on the LCD screen.
3. Press STANDBY/ON button to return the unit to standby mode.
Viewing Angle Adjustment
The unit is designed to allow users to adjust the screen to a
comfortable viewing angle. The viewing angle can be adjusted
within a 20° range.
1. Hold the stand with one hand.
2. Adjust viewing angle of the unit with other hand.
Note:
• Do not attempt to exceed the maximum adjustable angle
settings as stated above. Attempting this will result in
damaging the unit and stand.
Wall Mounting
1. Mark the correct mounting position on the wall (use the
included template sheet for wall mounting).
2. Install the wall mounting brackets with screw(s) at the marked
position on the wall.
3. Align the slot hole(s) of the unit over the bracket and slide the
unit downward until it is firmly hooked.
Automatic Off (SLEEP function)
This feature allows you to select a precise time for automatically turning off the unit. (maximum
240 minutes).
1. Press the SLEEP button on the remote control until a desired playtime (minutes) appears
on the display.
(SLEEP 240....210....180....150....120....90....60....30....25....20....15....10....5....OFF ).
2. The unit will automatically turn off once the selected turning off time is reached to "0".
UNIT OPERATION
