1.877.4VPULSE
or
www.virginpulse.com
Make sure the telephone is OFF before you replace battery.
1.
Remove the battery compartment door by pushing down on
the top of the door and sliding out..
2. Disconnect the battery plug from the jack inside the battery
compartment and remove the battery pack from the handset.
3. Insert the new battery pack and connect the cord to the jack
inside the handset.
4. Put the battery compartment door back on.
5. Place handset in the base to charge.
Allow the handset battery to properly charge (for 12 hours)
prior to first use or when you install a new battery pack. If you
do not properly charge the phone, battery performance
will be compromised.
CAUTION:
To reduce the risk of fire or personal injury,
use only the battery listed in the instruction book.
Note:
The RBRC seal on the battery used in your product indicates that
we are participating in a program to collect and recycle Nickel Cadmium
batteries throughout the United States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.
Battery Safety Precautions
•
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic
materials could be released which can cause injury.
CHANGING THE BATTERY
Push down
Slide out
