1.877.4VPULSE
or
www.virginpulse.com
Storing a Name and Number in Memory
1.
Make sure the phone is OFF (not in talk mode).
2. Press the
mem
button.
3. Press the desired memory location (0 through 9).
4. Press the
mem
button again. The display shows
ENTER NAME
.
(
NOTE:
If you don't want to enter the name, skip step 5. )
5. Use the number keys on the handset to enter the name (up to 15 characters) and press
the memory button to save. More than one letter is stored in each of the number keys.
For example, to enter the name Bill Smith, press the
2
key twice for the letter “B”. Press
the
4
key 3 times for the letter “I”. Press the
5
key 3 times for the letter “L”. Wait for 1
second, and then press the
5
key 3 times for the second letter “L”. Press the
1
key to
insert a space between the “L” and the “S”. Press the
7
key 4 times for the letter “S”;
press the
6
key once for the letter “M”; press the
4
key 3 times for the letter “I”; press
the
8
key for the letter “T”; press the
4
key twice for the letter “H”.
(
NOTE:
The cursor will automatically move to the next position if another number key is
pressed. To delete or backspace over an incorrect letter use the
delete
key.)
6. Press the
mem
button to save the name. The display shows
ENTER NUMBR
.
7. Use the number keypad to enter the telephone number you want to store (up to 24
digits).
8. Press
mem
again to store the number. You will hear a confirmation tone.
