Virax 253620, Instruction Manual

Page: 18 / 136

18
Caption
The tool bears a label describing special signs. These provide important information about the product or instructions of use.
Compliance with European safety standards. Read the original manual.
Wear glasses. Wear gloves.
2 Technical data
NOTES:
•
Carefully read the instructions before using this tool.
•
The manufacturer reserves the right to improve his products and change their specifications without
special notice.
•
The specifications may vary according to the country.
3 Main safety warnings for the tool
WARNING:
• Read all safety warnings and all instructions. The lack of application of warnings and instructions may result in
electric shock, fire and/or severe injury.
• Store all warnings and instructions to be able to refer to them subsequently.
• In the warnings, the term « tool » refers to your power tool supplied by battery.
3.1 Work zone safety
• ENSURE THE WORK ZONE IS CLEAN
AND PROPERLY LIT AT ALL TIMES.
Poorly lit or cluttered zones are sources of accidents.
Model VIPER P22+
Reference 253620
Force delivered by the machine to guarantee crimping Min 32 kN; Max.35 kN
Battery supply 14.4V DC 2.5 Ah Li-ion 36 Wh
Power absorbed 300 W
Crimping capacity:
For PER / PEX tubes: Ø 12 to Ø 32 mm.
For Multilayer tubes: Ø 12 to Ø 110 mm.
For steel tubes (stainless steel or galvanized): Ø 12 to Ø 54 mm.
For copper tubes: Ø 12 to Ø 54 mm.
Crimping cycle time:
For dimensions Ø12 - Ø40 mm 3-6s
For dimensions Ø40 - Ø110 mm 7-9s
Jaw rotation 320°
Weight (without battery ; without jaw / with battery ; without jaw) 3.6 / 4.2 kg
Machine size with battery ; without jaw
length / height / width (mm)
408 / 321 / 85
Dimensions of the case
– length / height / width (mm)
594 / 494 / 149
Safety disengagement Yes: electronic
Information on sound and vibration emissions
Sound emission:
Acoustic pressure level at operator ears: LpA 78 dB (A)
Peak acoustic pressure level at operator ears: LpCrête 94 dB (C)
Acoustic power level: LwA 85 dB (A)
Uncertainty KpA 2.5 dB
As per standard NF EN ISO 15744
– tests on work cycles without part
Vibration emission
Weighted hand-arm acceleration values m/s²
On the trigger 0.54 m/s
Second hand at front 0.76 m/s
Estimated uncertainty
As per standard NF EN ISO 20643
– tests on work cycles without part
0.2 m/s