Table 2:
Description
Color
LED
• Off: System is off
• Green: System is healthy and operating
correctly
• Blinking Green: System is booting up
• Red: Major failure or alarm is present
Green/Amber/Red
SYS
• Off: Status of OMP to vSmart controller is
down
• Green: Status of OMP to vSmart controller is
up
Green
STAT
• Off: Power supply unit 1 is not present, or
router is not powered
• Green: 12-Volt output is OK on power supply
unit 1
• Red: Fault on power supply unit 1, or only
power supply unit 0 is connected
Green/Red
PWR 1
• Off: Router is not powered
• Green: 12-Volt output is OK on power supply
unit 0
• Red: Fault on power supply unit 0, or only
power supply unit 1 is connected
Green/Red
PWR 0
Reset Button
The front panel of the vEdge 2000 router has a reset button. The reset button is recessed to avoid accidentally
pressing it while the router is operational. To press the reset button, use a sharp narrow tool. Table 2 describes
the effects of pressing the reset button.
Table 3:
Behavior
Press
Duration
Pressing for two seconds resets and reboots the router.
Short press
Pressing for 10 seconds resets the router and reboots it with factory default configuration.
Long press
vEdge 2000 Router
6
vEdge 2000 Router
Front Panel Components