FRU Model Number
FRU
• PIM-2x10GE-SFP+
2-Port 10-Gigabit Ethernet SFP+ PIM
• SFP-1GE-SX
• SFP-1GE-LX
• SFP-1GE-EX
• SFP-1GE-Base-T
Gigabit Ethernet transceivers
• SFP+-10GE-SR
• SFP+-10GE-LR
10-Gigabit Ethernet transceivers
• vEdge-2000-Fan
Fan tray
Power Supply and Cooling in Cisco vEdge 2000 Routers
The vEdge 2000 router ships with two AC power supplies installed. Read this article to learn more about the
AC power supply in the router as well as about the cooling system and airflow through the router chassis.
AC Power Supply in vEdge 2000 Router
The vEdge 2000 router ships with two AC power supplies installed. The second power supply is for redundancy
and load-balancing. If one of the AC power supplies fails due to device failure or input power line failure, a
single unit is sufficient to power the entire router.
The AC power supply in a vEdge 2000 router is a hot-insertable and hot-removable field replacement unit
(FRU). You can remove and replace the power supply in the rear of the chassis without powering off the
router or disrupting normal functioning.
Table 1 describes the AC power supply specifications for the vEdge 2000 router.
Table 18:
Specification
Item
90-264
Vrms
AC input voltage
47-63 Hz
AC input line frequency
800 W
Maximum output power
125 Watts
Nominal power
consumption
vEdge 2000 Router
23
vEdge 2000 Router
Power Supply and Cooling in Cisco vEdge 2000 Routers