ENABLE:
setup the voltage protection switch, ON means enable, OFF means disable.
VOLTAGE:
setup the low Voltage limited value.
VOLTAGE OF START:
this means when the voltages of the battery reach this value, MDVR will startup
automatically.
INTERVAL TIME FOR CMS:
means when MDVR in low voltage for so long time, device will disconnect to CMS
server.
SHUTDOWN DELAY:
means when MDVR in low voltage for so long time, device will shutdown automatically.
3.2.5 PERIPHERAL
3.2.5.1 PTZ
CHANNEL:
The channel of PTZ connected.
PROTOCOL:
select the protocol of different PTZ, there are two protocols to switch, and the default is Pelco-D
BAUD RATE:
select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600
DATA BIT:
there are 5,6,7,8 options to select, default setting is 8.
STOP BIT:
there are 1and 2 to select, the default setting is 1.
VERIFY:
there are None/Odd/Even/Mark/Space to select, the default setting is none.
ADDRESS:
Fill the code of respective PTZ
User's Manual
MVR-704-GUI l v1.1 l 2014.01
ViPRO Corporation
Mobile DVR MVR-704
PERIPHERAL
45
