DATE/TIME:
Display date and time on OSD.
POSITION:
Setup the display position for DATE/TIME
ALARM:
Display Alarm information on OSD including the I/O sensor, speed, temperature, motion detection etc
…
ACCELERATION:
Display the information for inertia sensor
TEMPERATURE:
Display the temperature on OSD
FIRMWARE VERSION:
Display the current firmware version
GPS:
Display the GPS information, fixed means it will display the information always, just like date/time.
CHANNEL NAME
: Display the channel name.
VEHICLE NO.
: Display the vehicle NO.,
SPEED
: Display the speed on OSD.
RECORD is ON
means it will record the date/time, channel name and vehicle NO. into the record files.
To get the main information for MDVR working easier, on QUAD view, you can please just press
Ǐ
Enter
ǐ
on
remote control to show below screen. This screen will show all the important working information for the MDVR
including sensor, 3G/GPS/WIFI signal and connection, firmware version, MCU version, SIM dialed up status etc
…
But the precondition for this OSD is you must setup the OSD overlay menu to select which information you want to
display.
User's Manual
MVR-704-GUI l v1.1 l 2014.01
ViPRO Corporation
Mobile DVR MVR-704
OSD OVERLAY
29