ViPowER USB-VoIP Phone (Version:2005.11.16)
18
8.1.2 Cancel Forwarding Function
When you want to cancel forwarding function, you should go through the following
steps:
8.1.2.1. Make “CALL FORWARDING - PSTN” inefficient, like
18
8.1.2.2. Make “ringtone” efficient, like
8.2
When VPET-20 is connected with PBX as an extension
In your PBX, you need to press 0 to catch the idle trunk line, then dial the mobile
phone number, that is to say, there is an interval between 0 and the mobile phone number.
In the telecom standard, P stands for interval.
For example, if you want to forward incoming Skype calls to 13811111111 in PBX:
8.2.1. Add P between 0 and 13811111111. P is a capital letter. One P is equal to 2
seconds interval; PP is equal to 4 seconds interval, and so on. The quantity of P depends
on the settings of your PBX.
.
8.2.2. Other settings are the same as
8.1.1
9. Trouble Shooting
9.1
When I receive incoming calls, the regular phone does not ring.
a. The regular phone should be an analog phone
b. The regular phone should be connected with VPET-20
c. USB Audio Device should not be in the status of mute
d. You might forget to cancel the forwarding function, please refer to:”
8.1.2
Cancel Forwarding Function
” (Page 20)
www.vipower.com
Summary of Contents for Uni Skyper VPET-20
Page 1: ......
