background image

50

© 2011 Directed Electronics. All rights reserved.

LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, 
DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR 
COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR 
ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM 
OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE 
SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS 
AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE 
MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY 
LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT. 
DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, 
INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL 
DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF 
EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE 
LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A 
LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO 
THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT 
HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED 
DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE 
USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER 
CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the 
exclusion or limitation of incidental or consequential damages. This warranty gives you 
specific legal rights and you may also have other rights that vary from State to State. 
This warranty is only valid for sale of product(s) within the United States of America. 
Product(s) sold outside of the United States of America are sold “AS-IS” and shall have 
NO WARRANTY, express or implied. This product may be covered by a Guaranteed 
Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call 
Directed Customer Service at 1-800-876-0800. 
Make sure you have all of the following information from your authorized Directed 
dealer:

A clear copy of the sales receipt, showing the following:

Date of purchase

Your full name and address

Authorized dealer’s company name and address

Type of alarm installed

Year, make, model and color of the automobile

Automobile license number

Vehicle identification number

All security options installed on automobile

o Installation 

receipts

920-0003 06-06

Summary of Contents for Responder LE 5701






















































Reviews: