31
© 2011 Directed Electronics. All rights reserved.
Note
Temperature report must be turned on by an authorized Di-
rected dealer.
Remote Start Time-out Alert
During remote start a message is sent three minutes before and again
at one minute before the engine turns off. The
LED, Remote Start
LED flash and several tones play as an alert to reset the runtime if
desired.
Manual Transmission Start (MTS mode)
When installed into a manual transmission vehicle, the system requires
that the MTS mode is properly set when parking. If MTS mode is not
properly set or is defeated after being properly set the system will not
start the engine.
1. With the engine running,
set
the parking brake and leave the
engine running. For Pit Stop or Turbo Timer mode (to leave the
engine running after arming),
open
the driver door.
2.
Release
the foot brake (if pressed during Step 1), or
press
and
release
the foot brake anytime. As long as the engine is running
there is no time limit to perform this step.
3. Within 20 seconds of foot brake release,
press
any command
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.
4. The parking lights flash 5 times to confirm MTS mode enable and
the remote start activates the ignition outputs. The Remote Start
LED and On tones play to confirm.
5.
Turn
Off and
remove
the key from the ignition switch, the engine
remains running.
6.
Exit
the vehicle,
close
all the doors and
arm
the system.
Summary of Contents for Responder LE 5701
Page 46: ......
