4
42
2
© 2005 Directed Electronics, Inc. Vista, CA
5.
P
Prro
og
grraam
m tth
hee FFeeaattu
urree.. While holding the Valet/Program switch, you can toggle the feature
on and off using the remote transmitter. Pressing the button that arms the system will
select the one chirp or default setting. Pressing the button that disarms the system (or the
Channel Two button when in the single button arm/disarm configuration) will select the
two chirp setting.
N
NO
OTTEE:: Some features have more than two possible settings. Pressing Channel One will select the
one chirp setting, pressing Channel Two will toggle through the two-chirp and higher settings.)
6.
R
Reelleeaassee.. Release the Valet/Program switch.
O
On
nccee aa ffeeaattu
urree iiss p
prro
og
grraam
mm
meed
d::
■
Other features can be programmed within the same menu.
■
Another menu can be selected.
■
The learn routine can be exited if programming is complete.
TTo
o aacccceessss aan
no
otth
heerr ffeeaattu
urree iin
n tth
hee ssaam
mee m
meen
nu
u::
1. Press and release the Valet/Program switch the number of times necessary to advance from the feature you
just programmed to the next one you want to program.
2. Then press the Valet/Program switch once more and H
HO
OLLD
D it.
For example, if you just programmed the third feature in the menu and you would like to program the seventh
feature in the menu, you would press and release the Valet/Program switch four times and then press it once more
and H
HO
OLLD
D it. The siren would chirp seven times to confirm access to the seventh feature.
TTo
o sseelleecctt aan
no
otth
heerr m
meen
nu
u::
1. Press and hold the Valet/Program switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which menu
has been accessed.
For example, if you just programmed some features in the first menu and you want to program a feature in the
third menu, press and H
HO
OLLD
D the Valet/Program switch. After three seconds, the siren chirps twice indicating
access to the second menu. Continue to H
HO
OLLD
D the button and three seconds later the siren will chirp three times
indicating access to the third menu. Features in the third menu are then programmable following steps 4 through
6 of the System Features Learn Routine procedure.
